attention ALL BARK-BUSTER users - new product to retro-fit!
NEWS; the Australian designers of Bark Busters have now launched a very-innovative RETRO-FIT-TABLE LED 'add-on' for all Bark Busters products:
1. An always-on CLEAR LED 'light strip' that is very visible to cars; installed on the face of the hand-guard all the more so in that there are tiny inputs/movements from the handlebars, which then further increases the visibility of these LED's...
2. a different AMBER light strip that is essentially a VERY visible LED indicator, but situated on the face of the Bark Buster hand guard...
(you can also purchase a RESISTOR, that will slow the blink-rate of these LED indicators IF they are installed on a NON-LED circuit).
All wiring is included, and this is a fairly straight-forward, plug & play installation.
A very handy paper TEMPLATE is proved, simply drill TWO SMALL holes into the hand-guard, and screw either the CLEAR strip or the AMBER INDICATOR strip onto the face of the hand-guard
Pricing:
LED AMBER indicators - per set, with wiring: R720 incl vat.
Description
LED Amber Light - Indicator (set of 2).
For use as a turn indicator.
Can be fitted to the upper surface only of JET guards.
Can be fitted to the upper and/or lower surface of VPS and STORM guards.
E mark approved as an Indicator light.
15 super bright LED's per light.
Low power draw.
Increase your visibility to other road users.
May require optional Resistor for correct flash rate (Code: LED-RES-001). Sold separately.
LED CLEAR 'high-viz' strip, per set, with wiring: R720 per set.
Description
LED White Light - Position/Running (set of 2).
Increase your visibility to other road users.
Can be fitted to the upper surface only of JET guards.
Can be fitted to the upper and/or lower surface of VPS and STORM guards.
E mark approved as a Position light.
15 super bright LED's per light.
Low power draw.
resistor for bikes that DO NOT HAVE LED indicators, R160.
Cheers
Chris & Team
Hi Chris.
Do you have this for all R1200GS Models? What effect will this have on our guarantee and/or insurances. Does anybody have advice.
Jacques
Yes, we have BarkBusters for the 1200GS (both liquid cooled and air cooled versions).
The hi-viz and / or indicator strips will fit ANY BarkBusters, so no problem there.
I am not qualified to advise on warranties - we bounce these questions off Shane Hoskins, and Donfords Cape Town, and he advises USUALLY, it's just a matter of fitting an in-line Hella Relay, so any after-market 'electical' product then fitted , such as spots, etc, cannot have any effect on the rest of the bikes functioning.
Cheers, Chris & Team
Hi Chris, these are SUPER cool!!!
Will you fit them too when bought?
we will definitely fit them...
we may ask you to get an auto electrician 9or anyone electrical) to wire them in - relatively simple job BUT my 3 guys are trained mechanically, not electrically...
thanks, Chris & Team
Hi
Will they work with the normal original guards?
Thanks
yes, we believe so, Jan, our Store employee, had been meaning to fit them to his BMW 800GS stainless + plastic handguards, and he thinks they WILL fit, so I too have confidence they will fit.
Cheers
Chris & Team
| © BMW Motorrad Club Cape 2006 - 2020 | Back to live site | Site built and hosted by HoneyBadger.net |
